PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 23058
23058 ✓ Verified by PartsTable
Disguise · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a Disguise industrial component. Key specifications include material: STEEL COMP 410 OVERALL, nut_style: SLEEVE, nut_length: 0.632 INCHES NOMINAL IN, point_type: CONVENTIONAL, body_length: 0.180 INCHES NOMINAL IN, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-134-3217, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23058
NSN: 5340-00-134-3217
FSC: 5340
CAGE: 78710 — TRIUMPH CONTROLS, LLC DBA TRIUMPH CONTROLS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
nut_styleSLEEVE
nut_length0.632 INCHES NOMINAL IN
point_typeCONVENTIONAL
body_length0.180 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length6.125 INCHES NOMINAL IN
nut_diameter0.531 INCHES NOMINAL IN
thread_class3B
tongue_width0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE WINDING
NSN5340-00-134-3217
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23058 MFR: Disguise ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 615 OVERALL
•
NOMINAL THREAD SIZE: 0.164 INCHES ROD CONNECTION IN
•
TONGUE THICKNESS: 0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
DISTANCE FROM END TO HOLE CENTER: 1.570 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SHANK OVERALL LENGTH: 1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 615 OVERALL
NOMINAL THREAD SIZE0.164 INCHES ROD CONNECTION IN
TONGUE THICKNESS0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
DISTANCE FROM END TO HOLE CENTER1.570 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
SURFACE TREATMENTPASSIVATE OVERALL
SHANK OVERALL LENGTH1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO TONGUE END0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
53558Interchangeable
interchangeable cross-reference
interchangeable
110S 29/32Interchangeable
interchangeable cross-reference
interchangeable
23058Interchangeable
interchangeable cross-reference
interchangeable
F6961Interchangeable
interchangeable cross-reference
interchangeable
XA1702-48Interchangeable
interchangeable cross-reference
interchangeable
B12-04-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23058?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23058?
23058 is a COIL,RADIO FREQUENCY manufactured by Disguise.
What parts can replace 23058?
There are 9 known substitutes for 23058: 53558, 110S 29/32, 23058 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23058?
23058 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-134-3217. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23058

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026