PartsTable
Technical Data Sheet
Download PDF

23052577 — ROD,GROOVED,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

23052577: ROD,GROOVED,HEADLESS.

The ROD,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL LEVER, chamfer_angle: 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED, hole_diameter: 0.379 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, chamfer_length: 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 32.750 INCHES NOMINAL IN, groove_diameter: 0.404 INCHES NOMINAL ALL GROOVES IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-407-3530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23052577
NSN: 5340-01-407-3530
FSC: 5340 — Hardware, Commercial
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
materialSTEEL LEVER
chamfer_angle45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
hole_diameter0.379 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
chamfer_length0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_length32.750 INCHES NOMINAL IN
groove_diameter0.404 INCHES NOMINAL ALL GROOVES IN
groove_quantity7
overall_diameter0.750 INCHES NOMINAL IN
drilled_hole_locationONE END
distance_from_end_to_hole_center0.750 INCHES NOMINAL IN
material_document_and_classificationAISI 1304 1316 ASSN STD SINGLE MATERIAL RESPONSE LEVER
NSN5340-01-407-3530
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23052577 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
GROOVE DIAMETER: 0.404 INCHES NOMINAL ALL GROOVES IN
•
DRILLED HOLE LOCATION: ONE END
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 1304 1316 ASSN STD SINGLE MATERIAL RESPONSE LEVER
•
GROOVE QUANTITY: 7
•
HOLE DIAMETER: 0.379 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL DIAMETER0.750 INCHES NOMINAL IN
GROOVE DIAMETER0.404 INCHES NOMINAL ALL GROOVES IN
DRILLED HOLE LOCATIONONE END
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1304 1316 ASSN STD SINGLE MATERIAL RESPONSE LEVER
OVERALL LENGTH32.750 INCHES NOMINAL IN
GROOVE QUANTITY7
HOLE DIAMETER0.379 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
CHAMFER ANGLE45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
DISTANCE FROM END TO HOLE CENTER0.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
23036002 ITEM 52Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 23052577?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23052577?
23052577 is a ROD,GROOVED,HEADLESS.
What parts can replace 23052577?
There is 1 known substitute for 23052577: 23036002 ITEM 52. Substitute compatibility should be verified for your specific system.
What is the NSN for 23052577?
23052577 is cataloged in the U.S. Government catalog under NSN 5340-01-407-3530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23052577

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.