PartsTable
Technical Data Sheet
Download PDF

230470 — MICROCIRCUIT,LINEAR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

230470: MICROCIRCUIT,LINEAR.

The MICROCIRCUIT,LINEAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, body_height: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, outside_diameter: 0.465 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.362 INCHES NOMINAL IN, features_provided: LASER TRIMMED AND MONOLITHIC AND W/COMMON MODE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-429-4567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
230470
NSN: 5330-00-429-4567
NIINs: 004294567, 009446941, 011491248
FSC: 5330 — Packing and Gasket Materials
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
body_height0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
outside_diameter0.465 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.362 INCHES NOMINAL IN
features_providedLASER TRIMMED AND MONOLITHIC AND W/COMMON MODE
inclosure_materialMETAL
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range-0.0 TO 70.0 CELSIUS DEGC
body_outside_diameter0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
input_circuit_pattern2 INPUT
end_item_identification6625-01-086-2271 MULTIMETER ASSEMBLY
NSN5330-00-429-4567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 230470 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.100 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.465 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.362 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.100 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.465 INCHES NOMINAL IN
APERTURE DIAMETER0.362 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
18531P11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 230470?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 230470?
230470 is a MICROCIRCUIT,LINEAR.
What parts can replace 230470?
There is 1 known substitute for 230470: 18531P11. Substitute compatibility should be verified for your specific system.
What is the NSN for 230470?
230470 is cataloged in the U.S. Government catalog under NSN 5330-00-429-4567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 230470