PartsTable
Technical Data Sheet
Download PDF

2304514-1CP — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2304514-1CP: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: PLASTIC EPOXY SEALING ELEMENT, construction: SOLID, accommodated_shaft_diameter: 0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN, criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-054-8922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2304514-1CP
NSN: 5330-01-054-8922
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialPLASTIC EPOXY SEALING ELEMENT
constructionSOLID
accommodated_shaft_diameter0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-01-054-8922
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2304514-1CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
ACCOMMODATED SHAFT DIAMETER: 0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC EPOXY SEALING ELEMENT
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
CRITICALITY CODE JUSTIFICATIONZZZY
ACCOMMODATED SHAFT DIAMETER0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
MATERIALPLASTIC EPOXY SEALING ELEMENT
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 1
2304514-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2304514-1CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2304514-1CP?
2304514-1CP is a SEAL,PLAIN.
What parts can replace 2304514-1CP?
There is 1 known substitute for 2304514-1CP: 2304514-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 2304514-1CP?
2304514-1CP is cataloged in the U.S. Government catalog under NSN 5330-01-054-8922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2304514-1CP