2304476 — NUT,PLAIN,HEXAGON

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

2304476: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, nut_style: HEXAGON, nut_height: 0.469 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), hardness_rating: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-298-9255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2304476

NSN: 5310-00-298-9255
FSC: 5310 — Nuts and Washers
CAGE: FB459 — EMBRAER AVIATION INTERNATIONAL (FRA)

SPECIFICATIONS

material	STEEL COMP 4130 OVERALL
nut_style	HEXAGON
nut_height	0.469 INCHES NOMINAL IN
thread_class	3B
thread_series	UNIFIED NATIONAL JOINT FINE (UNJF)
hardness_rating	34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
thread_direction	RIGHT-HAND
countersink_angle	110.0 DEGREES NOMINAL NUT
surface_treatment	CADMIUM OVERALL
width_across_flats	1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
nominal_thread_size	0.750 INCHES IN
bearing_surface_type	CHAMFERED
NSN	5310-00-298-9255

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN

•

BEARING SURFACE FINISH: 125.0 MICROINCHES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)

•

HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM

•

HOLE CONFIGURATION STYLE: CONFIGURATION B

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
BEARING SURFACE FINISH	125.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES	UNIFIED NATIONAL JOINT FINE (UNJF)
HARDNESS RATING	34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
HOLE CONFIGURATION STYLE	CONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.750 INCHES IN
NONDEFINITIVE SPEC/STD DATA	2 TYPE

SUBSTITUTES & CROSS-REFERENCES 6

2826146-1Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

10121295Reference document

Same NSN cross-reference

Reference document — Informative reference only

FF-N-836Reference document

Same NSN cross-reference

Reference document — Identification reference

5310PL0717697Reference document

Same NSN cross-reference

Reference document — Informative reference only

173388Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

NAS-509-12Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 2304476?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2304476?

2304476 is a NUT,PLAIN,HEXAGON.

What parts can replace 2304476?

There are 6 known substitutes for 2304476: 2826146-1, 10121295, FF-N-836 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2304476?

2304476 is cataloged in the U.S. Government catalog under NSN 5310-00-298-9255. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2304476 — NUT,PLAIN,HEXAGON

Request a Quote — 2304476