PartsTable
Technical Data Sheet
Download PDF

23040614 — TRANSMISSION,HYDRAULIC,VEHICULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

23040614: TRANSMISSION,HYDRAULIC,VEHICULAR.

TRANSMISSION,HYDRAULIC,VEHICULAR. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, bore_diameter: 0.2500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.3750 INCHES NOMINAL IN, outer_ring_width: 0.2813 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-227-2822, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23040614
NSN: 3110-00-227-2822
NIINs: 002272822, 011572901
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 9F512 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HYDRAULIC PUMP DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
bore_diameter0.2500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.3750 INCHES NOMINAL IN
outer_ring_width0.2813 INCHES NOMINAL IN
special_featuresOIL HOLE AND GROOVE IN INNER RING
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCHROMIUM OUTER RING OUTSIDE DIAMETER
lubrication_materialGREASE
overall_outside_diameter0.8750 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-227-2822
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 23040614 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2813 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2813 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
OVERALL OUTSIDE DIAMETER0.8750 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER RING
SURFACE TREATMENTCADMIUM EXPOSED SURFACES AS MOUNTED
SUBSTITUTES & CROSS-REFERENCES 8
BACB10B131Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FT44NBF614YJReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4NBF614YJ2CReference document
Same NSN cross-reference
Reference document — Secondary reference
4NBF614YJReference document
Same NSN cross-reference
Reference document — Secondary reference
NAS502-4MILG3278Reference document
Same NSN cross-reference
Reference document — Secondary reference
NAS502-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 23040614?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23040614?
23040614 is a TRANSMISSION,HYDRAULIC,VEHICULAR.
What parts can replace 23040614?
There are 8 known substitutes for 23040614: BACB10B131, FT44NBF614YJ, 4NBF614YJ2C and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23040614?
23040614 is cataloged in the U.S. Government catalog under NSN 3110-00-227-2822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23040614

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.