PartsTable
Technical Data Sheet
Download PDF

2302SA — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

2302SA: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 15.00 MILLIMETERS NOMINAL MM, overall_width: 17.0 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNING, load_direction: RADIAL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-5049, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2302SA
NSN: 3110-00-156-5049
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter15.00 MILLIMETERS NOMINAL MM
overall_width17.0 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
self-alignment_locationINTERNAL
overall_outside_diameter42.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-156-5049
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2302SA · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 42.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
ALIGNMENT TYPE: SELF-ALIGNING
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH17.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER42.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
ALIGNMENT TYPESELF-ALIGNING
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONPRIMARILY RADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 4
2302Reference document
Same NSN cross-reference
Reference document — Secondary reference
L6302-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
72-6970-117Reference document
Same NSN cross-reference
Reference document — Secondary reference
L6302Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2302SA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2302SA?
2302SA is a BEARING,BALL,ANNULAR.
What parts can replace 2302SA?
There are 4 known substitutes for 2302SA: 2302, L6302-2, 72-6970-117 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2302SA?
2302SA is cataloged in the U.S. Government catalog under NSN 3110-00-156-5049. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2302SA