PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2301707
2301707 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include color: BLACK, material: RUBBER CHLOROPRENE CLASS CR OVERALL, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 1.156 INCHES NOMINAL IN, center_hole_diameter: 0.850 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN, cross-sectional_height: 0.156 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-6329, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2301707
NSN: 5330-00-297-6329
FSC: 5330
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
colorBLACK
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter1.156 INCHES NOMINAL IN
center_hole_diameter0.850 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
cross-sectional_height0.156 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
material_document_and_classificationMIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-297-6329
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2301707 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.850 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.156 INCHES NOMINAL IN
•
COLOR: BLACK
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
PERIPHERAL DIAMETER: 1.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.850 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.156 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S: ARMORED COMBAT EARTHMOVER (M9); ARMORED VEHICLE LAUNCH BRIDGE (M60A1 & M48A5); FIELD ARTILLERY AMMUNITION SUPPORT VEHCILE (FAAGV) (M992); AIRCRAFT, T-39; TRUCK, CARGO, 5-TON, 6X6, XLWB W/E; CRANE, WHEEL MTD, 20-TON W/BLK TACKLE; TRUCK, CARGO, DROPSIDE, 2 1/2-TON 6X6 W/E; TRUCK, AMBULANCE, 2-LITTER, SOFT TOP, 1 1/4 TON HMMWV; TRUCK, CARGO, DROPSIDE, 5-TON, 6X6 (M813A1, M-923, M-925); TRUCK, CARGO, DROPSIDE, XLWB, 5-TON, 6X6 (M814,M927,M928)
COLORBLACK
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
PERIPHERAL DIAMETER1.156 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
SN7474JInterchangeable
interchangeable cross-reference
interchangeable
SN20018Interchangeable
interchangeable cross-reference
interchangeable
SN7474JAInterchangeable
interchangeable cross-reference
interchangeable
102361Interchangeable
interchangeable cross-reference
interchangeable
L218461-1Interchangeable
interchangeable cross-reference
interchangeable
C4394Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2301707?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2301707?
2301707 is a PACKING,PREFORMED.
What parts can replace 2301707?
There are 12 known substitutes for 2301707: SN7474J, SN20018, SN7474JA and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2301707?
2301707 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-6329. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2301707

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026