PartsTable
Technical Data Sheet
Download PDF

23015-6 — WASHER

✓ Government record, cited
Unold · NUT WASHER
PRODUCT OVERVIEW

23015-6: WASHER.

Indoors or outdoors: Wherever there is a power socket, the stylish BARBECUE-GRILL Edel can be used! The grill can be completely dismantled, the grease tray and the grill plate with its ceramic non-stick coating can be removed for cleaning. The removable glass lid also acts as a splash guard.

The grill surface has a ribbed surface for meat and a smooth one for vegetables or fish. The BARBECUE-GRILL Edel can be heated up to around 210°C in five stages using the temperature control. The operating instructions come with recipes free of charge.

This part is cataloged in the U.S. Government catalog under NSN 5310-01-078-6442, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
23015-6
NSN: 5310-01-078-6442
NIINs: 010786442, 012450485
FSC: 5310 — Nuts and Washers
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
materialCOPPER OVERALL
thickness0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
hole_diameter0.318 INCHES NOMINAL IN
overall_diameter0.500 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-078-6442
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 23015-6 · Unold ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.318 INCHES NOMINAL IN
•
THICKNESS: 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALCOPPER OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.318 INCHES NOMINAL IN
THICKNESS0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
525AS14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 23015-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23015-6?
23015-6 is a WASHER manufactured by Unold.
What parts can replace 23015-6?
There is 1 known substitute for 23015-6: 525AS14. Substitute compatibility should be verified for your specific system.
What is the NSN for 23015-6?
23015-6 is cataloged in the U.S. Government catalog under NSN 5310-01-078-6442. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23015-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.