PartsTable
Technical Data Sheet
Download PDF

23008249 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

23008249: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 1100 OVERALL, hole_diameter: 0.255 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.249 INCHES NOMINAL IN, overall_length: 2.249 INCHES NOMINAL IN, special_features: CENTERLINE OF CORRUGATION OF APERATURE 1.790 IN.,CORNERS RADIUSED 0.220 IN. IN, aperture_diameter: 1.525 INCHES MINIMUM AND 1.545 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-327-3538, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23008249
NSN: 5330-01-327-3538
FSC: 5330 — Packing and Gasket Materials
CAGE: 63005 — ROLLS-ROYCE CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 1100 OVERALL
hole_diameter0.255 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.249 INCHES NOMINAL IN
overall_length2.249 INCHES NOMINAL IN
special_featuresCENTERLINE OF CORRUGATION OF APERATURE 1.790 IN.,CORNERS RADIUSED 0.220 IN. IN
aperture_diameter1.525 INCHES MINIMUM AND 1.545 INCHES MAXIMUM IN
bolt_hole_quantity4
cross-sectional_thickness0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
cross-sectional_shape_styleRECTANGULAR METAL
material_document_and_classificationAMS 4001 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_bolt_holes_along_width1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-327-3538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23008249 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4001 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
APERTURE DIAMETER: 1.525 INCHES MINIMUM AND 1.545 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.014 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4001 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.249 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
OVERALL WIDTH2.249 INCHES NOMINAL IN
APERTURE DIAMETER1.525 INCHES MINIMUM AND 1.545 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESCENTERLINE OF CORRUGATION OF APERATURE 1.790 IN.,CORNERS RADIUSED 0.220 IN. IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 23008249?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23008249?
23008249 is a GASKET.
What is the NSN for 23008249?
23008249 is cataloged in the U.S. Government catalog under NSN 5330-01-327-3538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23008249

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.