PartsTable
Technical Data Sheet
Download PDF

230079069 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

230079069: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.358 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN, center_hole_diameter: 2.165 INCHES MINIMUM AND 2.185 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-800-8718, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
230079069
NSN: 5331-00-800-8718
FSC: 5331 — O-ring
CAGE: 0291H — ROSOMAK S.A (POL)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter2.358 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN
center_hole_diameter2.165 INCHES MINIMUM AND 2.185 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-800-8718
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 230079069 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.358 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 2.165 INCHES MINIMUM AND 2.185 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.358 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER2.165 INCHES MINIMUM AND 2.185 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 5
199993Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS28775-139Reference document
Same NSN cross-reference
Reference document — Secondary reference
1376-16-161Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NB39813972Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5331PL0809656Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 230079069?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 230079069?
230079069 is a O-RING.
What parts can replace 230079069?
There are 5 known substitutes for 230079069: 199993, MS28775-139, 1376-16-161 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 230079069?
230079069 is cataloged in the U.S. Government catalog under NSN 5331-00-800-8718. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 230079069