PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 23001336
23001336 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 9.320 INCHES NOMINAL IN, aperture_diameter: 7.820 INCHES NOMINAL IN, precious_material: SILVER, surface_treatment: SILVER OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-127-4534, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23001336
NSN: 5330-01-127-4534
FSC: 5330
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter9.320 INCHES NOMINAL IN
aperture_diameter7.820 INCHES NOMINAL IN
precious_materialSILVER
surface_treatmentSILVER OVERALL
bolt_hole_quantity32
bolt_circle_diameter8.550 INCHES NOMINAL IN
end_item_identificationTF41-A-2 ENGINE FOR FMS FOR GREECE AND THAILAND
cross-sectional_thickness0.006 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
largest_bolt_hole_diameter0.520 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR METAL
NSN5330-01-127-4534
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23001336 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SMALLEST BOLT HOLE DIAMETER: 0.300 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE DIAMETER: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.006 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 7.820 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 32
•
PRECIOUS MATERIAL AND LOCATION: SURFACES SILVER
TECHNICAL CHARACTERISTICS (FLIS)
SMALLEST BOLT HOLE DIAMETER0.300 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
END ITEM IDENTIFICATIONTF41-A-2 ENGINE FOR FMS FOR GREECE AND THAILAND
HOLE DIAMETER0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.006 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
APERTURE DIAMETER7.820 INCHES NOMINAL IN
BOLT HOLE QUANTITY32
PRECIOUS MATERIAL AND LOCATIONSURFACES SILVER
BOLT CIRCLE DIAMETER8.550 INCHES NOMINAL IN
OUTSIDE DIAMETER9.320 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
RHD160Interchangeable
interchangeable cross-reference
interchangeable
GGG-J-63Interchangeable
interchangeable cross-reference
interchangeable
A-A-381Interchangeable
interchangeable cross-reference
interchangeable
364673-011Interchangeable
interchangeable cross-reference
interchangeable
67251Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23001336?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23001336?
23001336 is a GASKET.
What parts can replace 23001336?
There are 5 known substitutes for 23001336: RHD160, GGG-J-63, A-A-381 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23001336?
23001336 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-127-4534. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23001336

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026