PartsTable
Technical Data Sheet
Download PDF

23-09114 — FILTER,BAND PASS-LOW PASS

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

23-09114: FILTER,BAND PASS-LOW PASS.

The FILTER,BAND PASS-LOW PASS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.098 INCHES NOMINAL IN, hole_diameter: 0.578 INCHES NOMINAL IN, overall_diameter: 1.156 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-661-5308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23-09114
NSN: 3120-00-661-5308
NIINs: 006615308, 014788671, 014788675, 015389951, 015728669, 015766773
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 22380 — DRS PHOTRONICS, INC. DBA DRS PHOTRONICS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.098 INCHES NOMINAL IN
hole_diameter0.578 INCHES NOMINAL IN
overall_diameter1.156 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification2320-01-458-1207; TRUCK TRACTOR
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyWASHER-FLAT PLATED, HARDENED STEEL
NSN3120-00-661-5308
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 23-09114 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 0.3760 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
•
BODY INSIDE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER0.3760 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 70.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-15016, SYMBOL 2190 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-8657,TYPE 1,COMP A MIL SPEC 1ST MATERIAL RESPONSE OR MIL-B-8657,TYPE 1,COMP B MIL SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
MATERIALOIL LUBRICATING LUBRICATION
SUBSTITUTES & CROSS-REFERENCES 8
A308-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASTM B438Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
EP040604Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5508Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS17795-22Reference document
Same NSN cross-reference
Reference document — Secondary reference
OLB-55Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 23-09114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23-09114?
23-09114 is a FILTER,BAND PASS-LOW PASS.
What parts can replace 23-09114?
There are 8 known substitutes for 23-09114: A308-1, ASTM B438, EP040604 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23-09114?
23-09114 is cataloged in the U.S. Government catalog under NSN 3120-00-661-5308. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23-09114

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.