PartsTable
Technical Data Sheet
PartsTable / MRO / 23-07
23-07 ✓ Verified by PartsTable
3M · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

3M™ Masking Tape 2307 was formulated for general use, with a broad tack that will adhere to a variety of surfaces. The rubber adhesive sticks instantly with moderate strength. The crepe paper backing conforms over irregular surfaces and around corners while holding reliably.

It is especially useful in woodworking and cabinet making applications.<br><br><b>Your Everyday Woodworking Tape</b><br>With easy tearability and resistance to slivering, 3M™ Masking Tape 2307 has proven to be an excellent choice for woodworking and cabinet applications. Using a rubber adhesive, this solvent-free tape holds well and removes cleanly in one piece. The easy unwind and simple tearability of this tape should help you get your project done quickly.<br><br><b>Recommended Applications</b><br>Woodworking<br>Cabinet Making<br><br><b>What is Masking Tape?</b><br>Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines, and remove easily and cleanly This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8427, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 23-07
NSN: 5330-00-154-8427
FSC: 5330
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
colorTAN OVERALL
materialPLASTIC
base_typeSTANDARD BASE
coil_typeISOLATED
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
thickness0.250 INCHES NOMINAL IN
unit_typeELECTROMECHANICAL
base_styleSUB-MINIATURE TWO PIN
body_width3.062 INCHES MAXIMUM IN
bulb_styleT (TUBULAR)
case_styleSQUARE
head_styleHEXAGON
NSN5330-00-154-8427
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23-07 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 4.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 5.501 INCHES NOMINAL IN
•
SEAL WIDTH: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER4.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER5.501 INCHES NOMINAL IN
SEAL WIDTH0.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
55200Interchangeable
interchangeable cross-reference
interchangeable
1A9859Interchangeable
interchangeable cross-reference
interchangeable
X1-63Interchangeable
interchangeable cross-reference
interchangeable
62AX310Interchangeable
interchangeable cross-reference
interchangeable
59007HInterchangeable
interchangeable cross-reference
interchangeable
2307Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23-07?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23-07?
23-07 is a RADAR SET SUBASSEMBLY manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 23-07?
There are 25 known substitutes for 23-07: 55200, 1A9859, X1-63 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 23-07?
23-07 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-8427. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23-07

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026