PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 23-06459-001
23-06459-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CRANK,HAND is a the manufacturer industrial component. Key specifications include color: YELLOW OVERALL, ratchet: NOT INCLUDED, material: STEEL OVERALL, arm_style: OFFSET, drive_width: 0.562 INCHES NOMINAL IN, handle_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-395-8758, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23-06459-001
NSN: 5340-00-395-8758
FSC: 5340
CAGE: 51064 — ROBBINS AND MYERS INC (USA)
SPECIFICATIONS
colorYELLOW OVERALL
ratchetNOT INCLUDED
materialSTEEL OVERALL
arm_styleOFFSET
drive_width0.562 INCHES NOMINAL IN
handle_styleROUND
handle_length4.000 INCHES NOMINAL IN
offset_height0.562 INCHES NOMINAL IN
drive_end_styleEXTERNAL
mounting_methodRIVET HANDLE
surface_treatmentPAINT OVERALL
crank_throw_length8.250 INCHES NOMINAL IN
NSN5340-00-395-8758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 23-06459-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
MOUNTING METHOD: RIVET HANDLE
•
DRIVE END STYLE: EXTERNAL
•
LENGTH FROM END TO ARM CENTER: 4.250 INCHES NOMINAL IN
•
HANDLE ROTATING FEATURE: INCLUDED
•
DRIVE WIDTH: 0.562 INCHES NOMINAL IN
•
ARM STYLE: OFFSET
•
DRIVE FACILITY STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
MOUNTING METHODRIVET HANDLE
DRIVE END STYLEEXTERNAL
LENGTH FROM END TO ARM CENTER4.250 INCHES NOMINAL IN
HANDLE ROTATING FEATUREINCLUDED
DRIVE WIDTH0.562 INCHES NOMINAL IN
ARM STYLEOFFSET
DRIVE FACILITY STYLESQUARE
CRANK OVERALL LENGTH1.000 INCHES NOMINAL IN
DRIVE END OUTSIDE DIAMETER0.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
3095Upgraded Successor
successor cross-reference
successor
7300-57Interchangeable
interchangeable cross-reference
interchangeable
1296DPC8Interchangeable
interchangeable cross-reference
interchangeable
84AInterchangeable
interchangeable cross-reference
interchangeable
1601Interchangeable
interchangeable cross-reference
interchangeable
6124PC13881Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23-06459-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23-06459-001?
23-06459-001 is a CRANK,HAND.
What parts can replace 23-06459-001?
There are 18 known substitutes for 23-06459-001: 3095, 7300-57, 1296DPC8 and 15 more. Substitute compatibility should be verified for your specific system.
Is 23-06459-001 still available?
23-06459-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23-06459-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026