PartsTable
Technical Data Sheet
PartsTable / MRO / 23-0100-0808
23-0100-0808 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 23-0100-0808 is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, hole_diameter: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, overall_width: 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN, overall_length: 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.063 INCHES MINIMUM AND 1.083 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-308-1464, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 23-0100-0808
NSN: 5999-01-308-1464
FSC: 5999
CAGE: 18565 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CHOMERICS DIVISION (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
hole_diameter0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
overall_width1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
overall_length1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter1.063 INCHES MINIMUM AND 1.083 INCHES MAXIMUM IN
precious_materialSILVER
surface_treatmentUNABLE TO DECODE
bolt_hole_quantity4
outside_corner_radius0.074 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
cross-sectional_height0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
cross-sectional_shape_styleEMI
NSN5999-01-308-1464
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 23-0100-0808 MFR 23-0100-0808
KEY FEATURES
•
PRECIOUS MATERIAL AND LOCATION: EMI/RFI CONDUCTIVE PARTICLES SILVER
•
APERTURE DIAMETER: 1.063 INCHES MINIMUM AND 1.083 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-G-83528 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
STYLE DESIGNATOR: NON-CIRCULAR
•
BOLT HOLE QUANTITY: 4
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.052 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
PRECIOUS MATERIAL AND LOCATIONEMI/RFI CONDUCTIVE PARTICLES SILVER
OVERALL WIDTH1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
APERTURE DIAMETER1.063 INCHES MINIMUM AND 1.083 INCHES MAXIMUM IN
TEST DATA DOCUMENT81349-MIL-G-83528 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
STYLE DESIGNATORNON-CIRCULAR
BOLT HOLE QUANTITY4
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.052 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
MATERIALUNABLE TO DECODE
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.052 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT RF SHIELDING GASKET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
PL433D0300 ITEM 83Upgraded Successor
successor cross-reference
successor
M83258/004D-019Upgraded Successor
successor cross-reference
successor
433D0300 ITEM 83Upgraded Successor
successor cross-reference
successor
MIL-G-835328/4Upgraded Successor
successor cross-reference
successor
M83528/004J019Upgraded Successor
successor cross-reference
successor
MIL-G-83528/4Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 23-0100-0808?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23-0100-0808?
23-0100-0808 is a 23-0100-0808. It is classified as a MRO (MRO_GENERAL).
What parts can replace 23-0100-0808?
There are 11 known substitutes for 23-0100-0808: PL433D0300 ITEM 83, M83258/004D-019, 433D0300 ITEM 83 and 8 more. Substitute compatibility should be verified for your specific system.
Is 23-0100-0808 still available?
23-0100-0808 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23-0100-0808

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026