PartsTable
Technical Data Sheet
Download PDF

22RX184 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

22RX184: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE SEALING ELEMENT, seal_width: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, construction: SOLID, housing_bore_diameter: 1.150 INCHES NOMINAL IN, accommodated_shaft_diameter: 0.840 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-455-2666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22RX184
NSN: 5330-00-455-2666
FSC: 5330 — Packing and Gasket Materials
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE SEALING ELEMENT
seal_width0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
constructionSOLID
housing_bore_diameter1.150 INCHES NOMINAL IN
accommodated_shaft_diameter0.840 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-455-2666
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22RX184 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 1.150 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 0.840 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE SEALING ELEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
HOUSING BORE DIAMETER1.150 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER0.840 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SEALING ELEMENT
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 3
A40625Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
00477776Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
86585473Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 22RX184?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22RX184?
22RX184 is a SEAL,PLAIN.
What parts can replace 22RX184?
There are 3 known substitutes for 22RX184: A40625, 00477776, 86585473. Substitute compatibility should be verified for your specific system.
What is the NSN for 22RX184?
22RX184 is cataloged in the U.S. Government catalog under NSN 5330-00-455-2666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22RX184