PartsTable
Technical Data Sheet
Download PDF

22NC2-82 — NUT,SELF-LOCKING,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

22NC2-82: NUT,SELF-LOCKING,SPLINE.

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OVERALL, nut_style: SPLINE, nut_height: 0.335 INCHES NOMINAL IN, pilot_length: 0.085 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-297-9082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22NC2-82
NSN: 5310-00-297-9082
FSC: 5310 — Nuts and Washers
CAGE: 019L2 — ESNA, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 OVERALL
nut_styleSPLINE
nut_height0.335 INCHES NOMINAL IN
pilot_length0.085 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.275 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.164 INCHES IN
thread_quantity_per_inch32
NSN5310-00-297-9082
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 22NC2-82 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
PILOT DIAMETER: 0.275 INCHES NOMINAL IN
•
PILOT LENGTH: 0.085 INCHES NOMINAL IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
NUT HEIGHT: 0.335 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
PILOT DIAMETER0.275 INCHES NOMINAL IN
PILOT LENGTH0.085 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.335 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLESPLINE
SUBSTITUTES & CROSS-REFERENCES 1
65245Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 22NC2-82?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22NC2-82?
22NC2-82 is a NUT,SELF-LOCKING,SPLINE.
What parts can replace 22NC2-82?
There is 1 known substitute for 22NC2-82: 65245. Substitute compatibility should be verified for your specific system.
What is the NSN for 22NC2-82?
22NC2-82 is cataloged in the U.S. Government catalog under NSN 5310-00-297-9082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22NC2-82

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.