PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 22F208-10L
22F208-10L ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LOCK,RIM is a the manufacturer industrial component. Key specifications include material: STEEL CASE, bolt_type: SINGLE BEVEL NONREVERSIBLE, thickness: 0.625 INCHES NOMINAL CASE IN, design_type: LATCH BOLT, operation_method: HANDLE ON OUTSIDE LATCH BOLT, special_features: CASE SHAPE:RECTANGULAR;CASE WIDTH:2.047 IN.NOM;CASE HEIGHT:3.375 IN.NOM; IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-774-8312, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22F208-10L
NSN: 5340-00-774-8312
FSC: 5340
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
materialSTEEL CASE
bolt_typeSINGLE BEVEL NONREVERSIBLE
thickness0.625 INCHES NOMINAL CASE IN
design_typeLATCH BOLT
operation_methodHANDLE ON OUTSIDE LATCH BOLT
special_featuresCASE SHAPE:RECTANGULAR;CASE WIDTH:2.047 IN.NOM;CASE HEIGHT:3.375 IN.NOM; IN
features_providedMASTER KEY PROVISIONS
locking_mechanism_typeTURN HANDLE
NSN5340-00-774-8312
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22F208-10L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.500 INCHES MINIMUM MEMBER IN
•
LOCKING MECHANISM TYPE: TURN HANDLE
•
MATERIAL: STEEL CASE
•
FEATURES PROVIDED: MASTER KEY PROVISIONS
•
OPERATION METHOD: HANDLE ON OUTSIDE LATCH BOLT
•
BOLT TYPE: SINGLE BEVEL NONREVERSIBLE
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.500 INCHES MINIMUM MEMBER IN
THICKNESS0.625 INCHES NOMINAL CASE IN
LOCKING MECHANISM TYPETURN HANDLE
SPECIAL FEATURESCASE SHAPE:RECTANGULAR;CASE WIDTH:2.047 IN.NOM;CASE HEIGHT:3.375 IN.NOM; IN
MATERIALSTEEL CASE
FEATURES PROVIDEDMASTER KEY PROVISIONS
OPERATION METHODHANDLE ON OUTSIDE LATCH BOLT
BOLT TYPESINGLE BEVEL NONREVERSIBLE
DESIGN TYPELATCH BOLT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
7EQ1201Interchangeable
interchangeable cross-reference
interchangeable
K1003Interchangeable
interchangeable cross-reference
interchangeable
570918Interchangeable
interchangeable cross-reference
interchangeable
73586Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22F208-10L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22F208-10L?
22F208-10L is a LOCK,RIM.
What parts can replace 22F208-10L?
There are 4 known substitutes for 22F208-10L: 7EQ1201, K1003, 570918 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22F208-10L?
22F208-10L is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-774-8312. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22F208-10L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026