PartsTable
Technical Data Sheet
Download PDF

2296509 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2296509: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER POLYSULFIDE CLASS T OVERALL, construction: SOLIDSOLID, fabrication_method: SOLIDSOLID, cross-sectional_height: 0.270 INCHES MINIMUM AND 0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM0.280 INCHES MAXIMUM IN, material_document_and_classification: ASTM D2000 2AK710E3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-692-6114, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2296509
NSN: 5330-00-692-6114
FSC: 5330 — Packing and Gasket Materials
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialRUBBER POLYSULFIDE CLASS T OVERALL
constructionSOLIDSOLID
fabrication_methodSOLIDSOLID
cross-sectional_height0.270 INCHES MINIMUM AND 0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM0.280 INCHES MAXIMUM IN
material_document_and_classificationASTM D2000 2AK710E3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-692-6114
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2296509 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.270 INCHES MINIMUM AND 0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM0.280 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2AK710E3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER POLYSULFIDE CLASS T OVERALL
•
FABRICATION METHOD: SOLIDSOLID
•
CONSTRUCTION: SOLIDSOLID
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.270 INCHES MINIMUM AND 0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM0.280 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2AK710E3 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER POLYSULFIDE CLASS T OVERALL
FABRICATION METHODSOLIDSOLID
CONSTRUCTIONSOLIDSOLID
SUBSTITUTES & CROSS-REFERENCES 3
3-86-129Reference document
Same NSN cross-reference
Reference document — Secondary reference
8333402Reference document
Same NSN cross-reference
Reference document — Secondary reference
154083Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2296509?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2296509?
2296509 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 2296509?
There are 3 known substitutes for 2296509: 3-86-129, 8333402, 154083. Substitute compatibility should be verified for your specific system.
What is the NSN for 2296509?
2296509 is cataloged in the U.S. Government catalog under NSN 5330-00-692-6114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2296509