PartsTable
Technical Data Sheet
Download PDF

229401-N-14 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

229401-N-14: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.150 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.810 INCHES NOMINAL IN, overall_length: 1.810 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.600 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-375-3111, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
229401-N-14
NSN: 5330-01-375-3111
NIINs: 013753111, 014896178
FSC: 5330 — Packing and Gasket Materials
CAGE: 24805 — ESC TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.150 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.810 INCHES NOMINAL IN
overall_length1.810 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.600 INCHES NOMINAL IN
bolt_hole_quantity4
end_item_identification1430-01-378-6963;MISSILE VEHICLE MOUNTED STINGER(AVENGER)
cross-sectional_thickness0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.750 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.750 INCHES NOMINAL IN
NSN5330-01-375-3111
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 229401-N-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 1
930-001N14Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 229401-N-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 229401-N-14?
229401-N-14 is a GASKET.
What parts can replace 229401-N-14?
There is 1 known substitute for 229401-N-14: 930-001N14. Substitute compatibility should be verified for your specific system.
What is the NSN for 229401-N-14?
229401-N-14 is cataloged in the U.S. Government catalog under NSN 5330-01-375-3111. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 229401-N-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.