PartsTable
Technical Data Sheet
Download PDF

229157 — CHAMBER,AIR BRAKE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

229157: CHAMBER,AIR BRAKE.

The CHAMBER,AIR BRAKE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, stroke_length: 4.000 INCHES IN, outside_diameter: 2.479 INCHES MINIMUM AND 2.489 INCHES MAXIMUM IN, special_features: STUD MTD, style_designator: CIRCULAR, aperture_diameter: 2.132 INCHES MINIMUM AND 2.142 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-915-2230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
229157
NSN: 5330-00-915-2230
NIINs: 009152230, 009174283
FSC: 5330 — Packing and Gasket Materials
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
stroke_length4.000 INCHES IN
outside_diameter2.479 INCHES MINIMUM AND 2.489 INCHES MAXIMUM IN
special_featuresSTUD MTD
style_designatorCIRCULAR
aperture_diameter2.132 INCHES MINIMUM AND 2.142 INCHES MAXIMUM IN
cross-sectional_thickness0.087 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
line_connection_thread_size_and_series/type_designator0.375-18 NPTF
NSN5330-00-915-2230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 229157 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.087 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 2.479 INCHES MINIMUM AND 2.489 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 2.132 INCHES MINIMUM AND 2.142 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.087 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER2.479 INCHES MINIMUM AND 2.489 INCHES MAXIMUM IN
APERTURE DIAMETER2.132 INCHES MINIMUM AND 2.142 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
A-229157Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 229157?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 229157?
229157 is a CHAMBER,AIR BRAKE.
What parts can replace 229157?
There is 1 known substitute for 229157: A-229157. Substitute compatibility should be verified for your specific system.
What is the NSN for 229157?
229157 is cataloged in the U.S. Government catalog under NSN 5330-00-915-2230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 229157