PartsTable / O-RING / 229-C-69
229-C-69
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.609 INCHES MINIMUM AND 2.665 INCHES MAXIMUM IN, center_hole_diameter: 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-291-3273, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
229-C-69
NSN: 5331-00-291-3273 FSC: 5331 — O-RINGCAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 2.609 INCHES MINIMUM AND 2.665 INCHES MAXIMUM IN center_hole_diameter 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-291-3273
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 229-C-69
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 2.609 INCHES MINIMUM AND 2.665 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN CENTER HOLE DIAMETER 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN OUTSIDE DIAMETER 2.609 INCHES MINIMUM AND 2.665 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
H556C Interchangeable interchangeable cross-reference
interchangeable
11229 Interchangeable interchangeable cross-reference
interchangeable
126-4517 Interchangeable interchangeable cross-reference
interchangeable
40653 Interchangeable interchangeable cross-reference
interchangeable
4424 Interchangeable interchangeable cross-reference
interchangeable
24909 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 229-C-69?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 229-C-69?
229-C-69 is a O-RING.
What parts can replace 229-C-69?
There are 19 known substitutes for 229-C-69: H556C, 11229, 126-4517 and 16 more. Substitute compatibility should be verified for your specific system.
Is 229-C-69 still available?
229-C-69 is currently cancelled.
Request a Quote — 229-C-69