PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 229-6-4
229-6-4 ✓ Verified by PartsTable
Legrand · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a Legrand industrial component. Key specifications include material: COPPER ALLOY OVERALL, flow_angle: 90.0 DEGREES, leg_length: 0.844 INCHES NOMINAL SECOND END IN, body_length: 0.207 INCHES NOMINAL IN, rating_method: WINDING TURNS SINGLE COMPONENT SINGLE WINDING, turn_quantity: 136 SINGLE COMPONENT SINGLE WINDING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-041-2526, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
229-6-4
NSN: 4730-00-041-2526
FSC: 4730
CAGE: 93061 — PARKER-HANNIFIN CORP DIV FLUID SYSTEM CONNECTOR DIVISION (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
flow_angle90.0 DEGREES
leg_length0.844 INCHES NOMINAL SECOND END IN
body_length0.207 INCHES NOMINAL IN
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity136 SINGLE COMPONENT SINGLE WINDING
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeOPEN
mounting_methodTERMINAL SINGLE GROUP
connection_stylePLAIN (PIPE) FIRST END
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.250 INCHES FIRST END IN
NSN4730-00-041-2526
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 229-6-4 · Legrand ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 2 FIGURE
•
OPERATING PRESSURE: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81343-J1231 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE CA345 ASSN STD SINGLE MATERIAL RESPONSE OR SAE CA360 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FLOW ANGLE: 90.0 DEGREES
•
THREAD SERIES DESIGNATOR: NPTF FIRST END
•
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED: 0.250 INCHES SECOND END IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA2 FIGURE
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81343-J1231 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
MATERIALCOPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE CA345 ASSN STD SINGLE MATERIAL RESPONSE OR SAE CA360 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FLOW ANGLE90.0 DEGREES
THREAD SERIES DESIGNATORNPTF FIRST END
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED0.250 INCHES SECOND END IN
NOMINAL THREAD SIZE0.250 INCHES FIRST END IN
CONNECTION STYLEBARBED OR BEADED (HOSE) SECOND END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
29964Interchangeable
interchangeable cross-reference
interchangeable
11640909Interchangeable
interchangeable cross-reference
interchangeable
701415Interchangeable
interchangeable cross-reference
interchangeable
22964Interchangeable
interchangeable cross-reference
interchangeable
H22-964Interchangeable
interchangeable cross-reference
interchangeable
K3613Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 229-6-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 229-6-4?
229-6-4 is a COIL,RADIO FREQUENCY manufactured by Legrand.
What parts can replace 229-6-4?
There are 17 known substitutes for 229-6-4: 29964, 11640909, 701415 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 229-6-4?
229-6-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-041-2526. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 229-6-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026