PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 229
229 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include angle: 36.0 DEGREES, color: IVORY, width: 10.600 INCHES NOMINAL IN, length: 1.750 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, body_type: SOLID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-014-1675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
229
NSN: 5330-00-014-1675
FSC: 5330
CAGE: 91556 — EMERSON ELECTRIC CO DBA BROOKS INSTRUMENT DIVISION (USA)
SPECIFICATIONS
angle36.0 DEGREES
colorIVORY
width10.600 INCHES NOMINAL IN
length1.750 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
body_typeSOLID
end_styleSHORT TWISTED HOOK BOTH ENDSSHORT TWISTED HOOK BOTH ENDS
head_typeSOLID
tool_typeSPEAR KNIFE BLADE AND MEDIUM FLAT TIP SCREWDRIVER AND WIRE SCRAPER
base_styleWIRE LEADS, DOWN
block_typeREGULAR
body_styleSTRAIGHT SHAPE DUPLEX
NSN5330-00-014-1675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 229 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.375 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 2.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER2.375 INCHES NOMINAL IN
PERIPHERAL DIAMETER2.625 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
58B248AAAInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 229?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 229?
229 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 229?
There is 1 known substitute for 229: 58B248AAA. Substitute compatibility should be verified for your specific system.
What is the NSN for 229?
229 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-014-1675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 229

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026