PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2286919
2286919 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, special_features: ONE TRANSVERSE KEYWAY 0.203 IN. WIDE BY 0.220 IN.

DEEP LOCATED 0.250 IN. FROM END IN, pin_overall_length: 6.250 INCHES NOMINAL IN, pin_overall_diameter: 1.1105 INCHES MINIMUM AND 1.1110 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-741-2901, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2286919
NSN: 5315-00-741-2901
FSC: 5315
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
special_featuresONE TRANSVERSE KEYWAY 0.203 IN. WIDE BY 0.220 IN. DEEP LOCATED 0.250 IN. FROM END IN
pin_overall_length6.250 INCHES NOMINAL IN
pin_overall_diameter1.1105 INCHES MINIMUM AND 1.1110 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-741-2901
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2286919 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL DIAMETER: 1.1105 INCHES MINIMUM AND 1.1110 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL LENGTH: 6.250 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PIN OVERALL DIAMETER1.1105 INCHES MINIMUM AND 1.1110 INCHES MAXIMUM IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL LENGTH6.250 INCHES NOMINAL IN
SPECIAL FEATURESONE TRANSVERSE KEYWAY 0.203 IN. WIDE BY 0.220 IN. DEEP LOCATED 0.250 IN. FROM END IN
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
1419Interchangeable
interchangeable cross-reference
interchangeable
HB12840Interchangeable
interchangeable cross-reference
interchangeable
ES689071-2Interchangeable
interchangeable cross-reference
interchangeable
BM4299Interchangeable
interchangeable cross-reference
interchangeable
BM3477Interchangeable
interchangeable cross-reference
interchangeable
NP11340PC9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2286919?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2286919?
2286919 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 2286919?
There are 20 known substitutes for 2286919: 1419, HB12840, ES689071-2 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2286919?
2286919 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-741-2901. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2286919

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026