PartsTable
Technical Data Sheet
Download PDF

2277830-7 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2277830-7: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, thread_class: 2B, thread_length: 0.250 INCHES MINIMUM IN, overall_length: 2.656 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), handle_clearance: 2.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-392-4982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2277830-7
NSN: 5340-01-392-4982
FSC: 5340 — Hardware, Commercial
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thread_class2B
thread_length0.250 INCHES MINIMUM IN
overall_length2.656 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
handle_clearance2.750 INCHES NOMINAL IN
style_designatorROUND
thread_directionRIGHT-HAND
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
NSN5340-01-392-4982
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2277830-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 2.406 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
THREAD LENGTH: 0.250 INCHES MINIMUM IN
•
STYLE DESIGNATOR: ROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6 T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.406 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
THREAD LENGTH0.250 INCHES MINIMUM IN
STYLE DESIGNATORROUND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6 T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.656 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
HANDLE CLEARANCE2.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2277830-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2277830-7?
2277830-7 is a HANDLE,BOW.
What is the NSN for 2277830-7?
2277830-7 is cataloged in the U.S. Government catalog under NSN 5340-01-392-4982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2277830-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.