PartsTable
Technical Data Sheet
Download PDF

2269538 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2269538: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.247 INCHES MINIMUM AND 0.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 9.375 INCHES MINIMUM AND 9.500 INCHES MAXIMUM IN, aperture_width: 8.438 INCHES NOMINAL IN, overall_length: 14.375 INCHES MINIMUM AND 14.500 INCHES MAXIMUM IN, aperture_length: 13.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-723-6984, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2269538
NSN: 5330-00-723-6984
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.247 INCHES MINIMUM AND 0.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width9.375 INCHES MINIMUM AND 9.500 INCHES MAXIMUM IN
aperture_width8.438 INCHES NOMINAL IN
overall_length14.375 INCHES MINIMUM AND 14.500 INCHES MAXIMUM IN
aperture_length13.438 INCHES NOMINAL IN
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
inside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
outside_corner_bevel_length_along_width0.562 INCHES NOMINAL IN
NSN5330-00-723-6984
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2269538 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 8.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH14.375 INCHES MINIMUM AND 14.500 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH9.375 INCHES MINIMUM AND 9.500 INCHES MAXIMUM IN
APERTURE WIDTH8.438 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.562 INCHES NOMINAL IN
APERTURE LENGTH13.438 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
1005412Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2269538?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2269538?
2269538 is a GASKET.
What parts can replace 2269538?
There is 1 known substitute for 2269538: 1005412. Substitute compatibility should be verified for your specific system.
What is the NSN for 2269538?
2269538 is cataloged in the U.S. Government catalog under NSN 5330-00-723-6984. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2269538

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.