PartsTable
Technical Data Sheet
Download PDF

2262-62PC03 — BEARING,ROLLER,CYLINDRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

2262-62PC03: BEARING,ROLLER,CYLINDRICAL.

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 4.4990 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN, overall_width: 2.0575 INCHES MINIMUM AND 2.0625 INCHES MAXIMUM IN, surface_finish: GROUND, locating_feature: NONLOCATING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-513-8459, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2262-62PC03
NSN: 3110-00-513-8459
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter4.4990 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN
overall_width2.0575 INCHES MINIMUM AND 2.0625 INCHES MAXIMUM IN
surface_finishGROUND
locating_featureNONLOCATING
style_designatorSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
overall_outside_diameter7.9990 INCHES MINIMUM AND 8.0000 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationRBEC NO.1
NSN3110-00-513-8459
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2262-62PC03 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
LOCATING FEATURE: NONLOCATING
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 7.9990 INCHES MINIMUM AND 8.0000 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
OVERALL WIDTH2.0575 INCHES MINIMUM AND 2.0625 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER7.9990 INCHES MINIMUM AND 8.0000 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER4.4990 INCHES MINIMUM AND 4.5000 INCHES MAXIMUM IN
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 1
2062-62PC03Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 2262-62PC03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2262-62PC03?
2262-62PC03 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace 2262-62PC03?
There is 1 known substitute for 2262-62PC03: 2062-62PC03. Substitute compatibility should be verified for your specific system.
What is the NSN for 2262-62PC03?
2262-62PC03 is cataloged in the U.S. Government catalog under NSN 3110-00-513-8459. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2262-62PC03

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.