The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-00-435-4283, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
225R16JS16S90A20-120
NSN:4720-00-435-4283 FSC:4720 — Hose and Flexible Tubing CAGE:98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
flow_angle
90.0 DEGREES SECOND END
seat_angle
37.0 DEGREES FIRST END
temp_rating
-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class
2B FIRST END
connection_type
THREADED INTERNAL TUBE FIRST END
inside_diameter
0.875 INCHES NOMINAL IN
connection_style
SWIVEL NUT FLARE FIRST END
outside_diameter
1.234 INCHES NOMINAL IN
special_features
HOSE MUST HAVE REUSABLE ENDS
thread_direction
RIGHT-HAND FIRST END
operating_pressure
800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
3200.0 POUNDS PER SQUARE INCH LBS
NSN
4720-00-435-4283
COMPONENT DIAGRAM
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES SECOND END
•
MEASURING METHOD AND LENGTH: 120.000 INCHES NOMINAL WORKING IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 7.300 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: ELBOW SECOND END
•
LAYER COMPOSITION AND LOCATION: 2ND LAYER BRAIDED COTTON CORD AND 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER
TECHNICAL CHARACTERISTICS
FLOW ANGLE
90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH
120.000 INCHES NOMINAL WORKING IN
TEMP RATING
-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS
7.300 INCHES IN
CONNECTION STYLE
SWIVEL NUT FLARE FIRST END
END CONNECTION DESIGN
ELBOW SECOND END
END CONNECTION DESIGN
STRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION
2ND LAYER BRAIDED COTTON CORD AND 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER
CONNECTION TYPE
RECESSED FLANGE SECOND END
CONNECTION TYPE
THREADED INTERNAL TUBE FIRST END
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 225R16JS16S90A20-120?
225R16JS16S90A20-120 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 225R16JS16S90A20-120?
There are 2 known substitutes for 225R16JS16S90A20-120: 2067680, M2250619-16-20-16-120.00. Substitute compatibility should be verified for your specific system.
What is the NSN for 225R16JS16S90A20-120?
225R16JS16S90A20-120 is cataloged in the U.S. Government catalog under NSN 4720-00-435-4283. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.