PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 22596
22596 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RECORDER-REPRODUCER SET,SIGNAL D. Key specifications include material: STEEL COMP MT1015, construction: ONE-PIECE, largest_width: 0.172 INCHES SINGLE END IN, overall_width: 0.312 INCHES IN, overall_length: 0.875 INCHES IN, first_end_style: CHAMFERED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3751, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22596
NSN: 5315-00-010-3751
FSC: 5315
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
materialSTEEL COMP MT1015
constructionONE-PIECE
largest_width0.172 INCHES SINGLE END IN
overall_width0.312 INCHES IN
overall_length0.875 INCHES IN
first_end_styleCHAMFERED
outside_diameter0.562 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.325 INCHES NOMINAL IN
basic_shape_styleSOLDER
surface_treatmentTIN OVERALL SINGLE LAYER
material_thickness0.020 INCHES IN
NSN5315-00-010-3751
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 22596 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-631,1010 TO 1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.3095 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-631,1010 TO 1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.3095 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
2501-08-00Interchangeable
interchangeable cross-reference
interchangeable
46-8Interchangeable
interchangeable cross-reference
interchangeable
1420Interchangeable
interchangeable cross-reference
interchangeable
103751Interchangeable
interchangeable cross-reference
interchangeable
22596Interchangeable
interchangeable cross-reference
interchangeable
225967Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22596?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22596?
22596 is a RECORDER-REPRODUCER SET,SIGNAL D.
What parts can replace 22596?
There are 18 known substitutes for 22596: 2501-08-00, 46-8, 1420 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22596?
22596 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3751. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22596

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026