PartsTable
Technical Data Sheet
Download PDF

225957 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

225957: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include case_style: RECESSED, seal_width: 0.313 INCHES NOMINAL IN, temp_rating: 300.0 FAHRENHEIT DEGF, housing_bore_diameter: 2.502 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-216-1338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
225957
NSN: 5330-00-216-1338
FSC: 5330 — Packing and Gasket Materials
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
case_styleRECESSED
seal_width0.313 INCHES NOMINAL IN
temp_rating300.0 FAHRENHEIT DEGF
housing_bore_diameter2.502 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.625 INCHES NOMINAL IN
NSN5330-00-216-1338
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 225957 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 300.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.502 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING300.0 FAHRENHEIT DEGF
SEAL WIDTH0.313 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.502 INCHES NOMINAL IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER1.625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
C500Y80D Y685 174 3410 06.861Reference document
Same NSN cross-reference
Reference document — Secondary reference
471839RSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 225957?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 225957?
225957 is a SEAL,PLAIN ENCASED.
What parts can replace 225957?
There are 2 known substitutes for 225957: C500Y80D Y685 174 3410 06.861, 471839R. Substitute compatibility should be verified for your specific system.
What is the NSN for 225957?
225957 is cataloged in the U.S. Government catalog under NSN 5330-00-216-1338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 225957