PartsTable
Technical Data Sheet
Download PDF

22547-1 — SHOE,2ND STAGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

22547-1: SHOE,2ND STAGE.

The SHOE,2ND STAGE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, ring_style: CONTRACTING CONCENTRIC, joint_style: VERTICAL JOINT, overall_width: 0.9850 INCHES MINIMUM AND 0.9860 INCHES MAXIMUM IN, inside_diameter: 12.764 INCHES MINIMUM AND 12.765 INCHES MAXIMUM IN, radial_wall_thickness: 0.6600 INCHES MINIMUM AND 0.6640 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-962-2653, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22547-1
NSN: 5330-00-962-2653
NIINs: 009622653, 012608747
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
ring_styleCONTRACTING CONCENTRIC
joint_styleVERTICAL JOINT
overall_width0.9850 INCHES MINIMUM AND 0.9860 INCHES MAXIMUM IN
inside_diameter12.764 INCHES MINIMUM AND 12.765 INCHES MAXIMUM IN
radial_wall_thickness0.6600 INCHES MINIMUM AND 0.6640 INCHES MAXIMUM IN
NSN5330-00-962-2653
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22547-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
JOINT STYLE: VERTICAL JOINT
•
INSIDE DIAMETER: 12.764 INCHES MINIMUM AND 12.765 INCHES MAXIMUM IN
•
RADIAL WALL THICKNESS: 0.6600 INCHES MINIMUM AND 0.6640 INCHES MAXIMUM IN
•
RING STYLE: CONTRACTING CONCENTRIC
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
OVERALL WIDTH0.9850 INCHES MINIMUM AND 0.9860 INCHES MAXIMUM IN
JOINT STYLEVERTICAL JOINT
INSIDE DIAMETER12.764 INCHES MINIMUM AND 12.765 INCHES MAXIMUM IN
RADIAL WALL THICKNESS0.6600 INCHES MINIMUM AND 0.6640 INCHES MAXIMUM IN
RING STYLECONTRACTING CONCENTRIC
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
22547Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 22547-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22547-1?
22547-1 is a SHOE,2ND STAGE.
What parts can replace 22547-1?
There is 1 known substitute for 22547-1: 22547. Substitute compatibility should be verified for your specific system.
What is the NSN for 22547-1?
22547-1 is cataloged in the U.S. Government catalog under NSN 5330-00-962-2653. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22547-1