PartsTable
Technical Data Sheet
Download PDF

225417 — SCREW,MACHINE

✓ Government record, cited
Equip · BOLT SCREW
PRODUCT OVERVIEW

225417: SCREW,MACHINE.

The equip® Cat.5e F/UTP Patch Cable is composed of high-quality materials and fully-examined to meet TIA/EIA-568-C.2 channel standard, delivering ultrahigh and error-free performance in the most demanding network environments. This part is cataloged in the U.S. Government catalog under NSN 5305-01-116-5414, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
225417
NSN: 5305-01-116-5414
FSC: 5305 — Screws
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
thread_length0.299 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303
fastener_length0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.125 INCHES IN
thread_quantity_per_inch44
thread_series_designatorUNF
NSN5305-01-116-5414
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 225417 · Equip ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.299 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.125 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 303
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
FASTENER LENGTH0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.299 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.125 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 303
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
FF-S-92B TY 1 ST 4SReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 225417?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 225417?
225417 is a SCREW,MACHINE manufactured by Equip.
What parts can replace 225417?
There is 1 known substitute for 225417: FF-S-92B TY 1 ST 4S. Substitute compatibility should be verified for your specific system.
What is the NSN for 225417?
225417 is cataloged in the U.S. Government catalog under NSN 5305-01-116-5414. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 225417