PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2253-1-13
2253-1-13 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER COUNTERSUNK, head_height: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, thread_length: 0.188 INCHES NOMINAL IN, screw_material: STEEL COMP 416SE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-415-6139, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2253-1-13
NSN: 5305-01-415-6139
FSC: 5305
CAGE: 94874 — DROITCOUR CO (USA)
SPECIFICATIONS
head_styleFILLISTER COUNTERSUNK
head_height0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
thread_length0.188 INCHES NOMINAL IN
screw_materialSTEEL COMP 416SE
fastener_length0.333 INCHES MINIMUM AND 0.343 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-415-6139
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2253-1-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS5610 ASSN STD SINGLE MATERIAL RESPONSE
•
HEAD DIAMETER: 0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD CLASS: 3A A
•
SCREW MATERIAL: STEEL COMP 416SE
•
THREAD LENGTH: 0.188 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.138 INCHES IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS5610 ASSN STD SINGLE MATERIAL RESPONSE
HEAD DIAMETER0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
INTERNAL DRIVE STYLESLOT
THREAD CLASS3A A
SCREW MATERIALSTEEL COMP 416SE
THREAD LENGTH0.188 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD STYLEFILLISTER COUNTERSUNK
HEAD HEIGHT0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1774Interchangeable
interchangeable cross-reference
interchangeable
57A5A228-1Interchangeable
interchangeable cross-reference
interchangeable
32141Interchangeable
interchangeable cross-reference
interchangeable
2348Interchangeable
interchangeable cross-reference
interchangeable
WTDX10SJTInterchangeable
interchangeable cross-reference
interchangeable
325-0331-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2253-1-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2253-1-13?
2253-1-13 is a SCREW,MACHINE.
What parts can replace 2253-1-13?
There are 10 known substitutes for 2253-1-13: 1774, 57A5A228-1, 32141 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2253-1-13?
2253-1-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-415-6139. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2253-1-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026