PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 22506
22506 ✓ Verified by PartsTable
schleich · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Superman, the Man of Steel, fights for the good in the world. Everyone knows the superhero in the red and blue costume; people rely on his superpowers. During the fight he has a close eye on his opponents and then he beats them again.

This time he will need all his superhuman abilities to win. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0787, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
22506
NSN: 3110-00-100-0787
FSC: 3110
CAGE: 81495 — KOEHRING CRANES, INC DBA TEREX CRANES DIV WAVERLY OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING TERMINAL
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
cone_width1.1930 INCHES NOMINAL IN
power_rating2.0 WATTS AVERAGE
bore_diameter2.0625 INCHES NOMINAL IN
overall_length1.570 INCHES NOMINAL IN
frequency_range0.000 HERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM
mounting_methodCONNECTOR
overall_diameter0.440 INCHES NOMINAL IN
special_featuresUSED ON A PUMP, ITEM AKA: PISTON, RATE;WEAPON SYSTEM ESSENTIAL
style_designatorNORMAL ANGLE
application_designTRANSMISSION LINE
NSN3110-00-100-0787
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 22506 · schleich ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 1.1930 INCHES NOMINAL IN
•
BORE DIAMETER: 2.0625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH1.1930 INCHES NOMINAL IN
BORE DIAMETER2.0625 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
14129Interchangeable
interchangeable cross-reference
interchangeable
667356Interchangeable
interchangeable cross-reference
interchangeable
2N1973Interchangeable
interchangeable cross-reference
interchangeable
900054-1Interchangeable
interchangeable cross-reference
interchangeable
3767Interchangeable
interchangeable cross-reference
interchangeable
173676Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22506?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22506?
22506 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by schleich.
What parts can replace 22506?
There are 17 known substitutes for 22506: 14129, 667356, 2N1973 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22506?
22506 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22506

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026