PartsTable / O-RING / 22504-136
22504-136
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.170 INCHES MINIMUM AND 2.216 INCHES MAXIMUM IN, center_hole_diameter: 1.977 INCHES MINIMUM AND 1.997 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-291-7295, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
22504-136
NSN: 5331-00-291-7295 FSC: 5331 — O-RINGCAGE: R1120 — SATAIR A/S (DNK)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 2.170 INCHES MINIMUM AND 2.216 INCHES MAXIMUM IN center_hole_diameter 1.977 INCHES MINIMUM AND 1.997 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-291-7295
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 22504-136
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 2.170 INCHES MINIMUM AND 2.216 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 1.977 INCHES MINIMUM AND 1.997 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN OUTSIDE DIAMETER 2.170 INCHES MINIMUM AND 2.216 INCHES MAXIMUM IN CENTER HOLE DIAMETER 1.977 INCHES MINIMUM AND 1.997 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
251286 Interchangeable interchangeable cross-reference
interchangeable
80013 Interchangeable interchangeable cross-reference
interchangeable
120368 Interchangeable interchangeable cross-reference
interchangeable
190-3-5 Interchangeable interchangeable cross-reference
interchangeable
8764939 Interchangeable interchangeable cross-reference
interchangeable
1455-4-5 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 22504-136?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22504-136?
22504-136 is a O-RING.
What parts can replace 22504-136?
There are 15 known substitutes for 22504-136: 251286, 80013, 120368 and 12 more. Substitute compatibility should be verified for your specific system.
Is 22504-136 still available?
22504-136 is currently cancelled.
Request a Quote — 22504-136