PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 225033
225033 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 1.8145 INCHES NOMINAL IN, bore_diameter: 2.7815 INCHES NOMINAL IN, overall_width: 2.3375 INCHES NOMINAL IN, standout_width: 0.2615 INCHES NOMINAL IN, special_features: CUP WITH OIL HOLES AND GROOVE,COMPLETE BEARING WITH SAPCER X1S-29680,BENCH LATERAL 0.008 IN. IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-634-8291, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
225033
NSN: 5330-00-634-8291
FSC: 5330
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.8145 INCHES NOMINAL IN
bore_diameter2.7815 INCHES NOMINAL IN
overall_width2.3375 INCHES NOMINAL IN
standout_width0.2615 INCHES NOMINAL IN
special_featuresCUP WITH OIL HOLES AND GROOVE,COMPLETE BEARING WITH SAPCER X1S-29680,BENCH LATERAL 0.008 IN. IN
style_designatorSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES
cone_corner_radius0.0460 INCHES NOMINAL IN
backface_corner_radius0.0310 INCHES NOMINAL IN
overall_outside_diameter4.5005 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 2
NSN5330-00-634-8291
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 225033 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
APERTURE DIAMETER: 0.860 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
BOLT CIRCLE DIAMETER: 1.400 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
APERTURE DIAMETER0.860 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.014 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
BOLT CIRCLE DIAMETER1.400 INCHES NOMINAL IN
OVERALL WIDTH1.960 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE CORNER RADIUS0.280 INCHES NOMINAL IN
FSC APPLICATION DATAENGINE,AIRCRAFT,TURBOJET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
9680Interchangeable
interchangeable cross-reference
interchangeable
29680-29622DX1S2Interchangeable
interchangeable cross-reference
interchangeable
225033Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 225033?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 225033?
225033 is a BEARING,ROLLER,TAPERED.
What parts can replace 225033?
There are 3 known substitutes for 225033: 9680, 29680-29622DX1S2, 225033. Substitute compatibility should be verified for your specific system.
Is 225033 still available?
225033 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 225033

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026