PartsTable
Technical Data Sheet
PartsTable / O-RING / 22502-16
22502-16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.754 INCHES NOMINAL IN, center_hole_diameter: 0.605 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-298-9977, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22502-16
NSN: 5331-00-298-9977
FSC: 5331 — O-RING
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter0.754 INCHES NOMINAL IN
center_hole_diameter0.605 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.062 INCHES NOMINAL IN
NSN5331-00-298-9977
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22502-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.754 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.605 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE160 MAXIMUM
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
OUTSIDE DIAMETER0.754 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.605 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
78-0-43Interchangeable
interchangeable cross-reference
interchangeable
1370-L495Interchangeable
interchangeable cross-reference
interchangeable
2-016N163-70Interchangeable
interchangeable cross-reference
interchangeable
AS568-016Interchangeable
interchangeable cross-reference
interchangeable
AS568BInterchangeable
interchangeable cross-reference
interchangeable
369A5368Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22502-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22502-16?
22502-16 is a O-RING.
What parts can replace 22502-16?
There are 23 known substitutes for 22502-16: 78-0-43, 1370-L495, 2-016N163-70 and 20 more. Substitute compatibility should be verified for your specific system.
Is 22502-16 still available?
22502-16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22502-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026