PartsTable
Technical Data Sheet
Download PDF

225-205-1-2SS — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

225-205-1-2SS: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: BINDING, head_height: 0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN, thread_length: 0.320 INCHES MINIMUM IN, screw_material: STEEL CORROSION RESISTING. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-845-9738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
225-205-1-2SS
NSN: 5305-00-845-9738
FSC: 5305 — Screws
CAGE: 19315 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS (USA)
SPECIFICATIONS
head_styleBINDING
head_height0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
thread_length0.320 INCHES MINIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.343 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch64
NSN5305-00-845-9738
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 225-205-1-2SS · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.343 INCHES NOMINAL IN
•
THREAD LENGTH: 0.320 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: BINDING
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.343 INCHES NOMINAL IN
THREAD LENGTH0.320 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEBINDING
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 2
13965-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
102095-0211-120Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 225-205-1-2SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 225-205-1-2SS?
225-205-1-2SS is a SCREW,MACHINE.
What parts can replace 225-205-1-2SS?
There are 2 known substitutes for 225-205-1-2SS: 13965-2, 102095-0211-120. Substitute compatibility should be verified for your specific system.
What is the NSN for 225-205-1-2SS?
225-205-1-2SS is cataloged in the U.S. Government catalog under NSN 5305-00-845-9738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 225-205-1-2SS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.