PartsTable
Technical Data Sheet

225-0223 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SOLENOID,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 1.051 INCHES NOMINAL IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.070 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-634-9394, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
225-0223
NSN: 5331-00-634-9394
FSC: 5331 — O-RING
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter1.051 INCHES NOMINAL IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-00-634-9394
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 225-0223 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.051 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.051 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
230079017InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
199975InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
080-04273-39InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
20427-01InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
20427-03InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
20427-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 225-0223?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 225-0223?
225-0223 is a SOLENOID,ELECTRICAL.
What parts can replace 225-0223?
There are 17 known substitutes for 225-0223: 230079017, 199975, 080-04273-39 and 14 more. Substitute compatibility should be verified for your specific system.
Is 225-0223 still available?
225-0223 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 225-0223