PartsTable
Technical Data Sheet
PartsTable / O-RING / 2249-019
2249-019 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 0.941 INCHES NOMINAL IN, center_hole_diameter: 0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-050-1539, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2249-019
NSN: 5331-01-050-1539
FSC: 5331 — O-RING
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter0.941 INCHES NOMINAL IN
center_hole_diameter0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-01-050-1539
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2249-019 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 0.941 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
OUTSIDE DIAMETER0.941 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AS568-019-MIL-P -83461Interchangeable
interchangeable cross-reference
interchangeable
8268Interchangeable
interchangeable cross-reference
interchangeable
14540 PC 15Interchangeable
interchangeable cross-reference
interchangeable
M83461/1-019Interchangeable
interchangeable cross-reference
interchangeable
4384536-1XX1-48CPInterchangeable
interchangeable cross-reference
interchangeable
4384536-1XX1-48Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2249-019?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2249-019?
2249-019 is a O-RING.
What parts can replace 2249-019?
There are 14 known substitutes for 2249-019: AS568-019-MIL-P -83461, 8268, 14540 PC 15 and 11 more. Substitute compatibility should be verified for your specific system.
Is 2249-019 still available?
2249-019 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2249-019

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026