PartsTable
Technical Data Sheet
Download PDF

22461917 — PADLOCK SET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

22461917: PADLOCK SET.

The PADLOCK SET is a the manufacturer industrial component. Key specifications include shackle_diameter: 0.281 INCHES NOMINAL IN, special_features: SHAKLE MADE OF BRASS, shackle_clearance: 2.5 INCHES MINIMUM AND 3.0 INCHES MAXIMUM IN, end_item_identification: SUBMARINE CLASS S-80 PLUS, operating_mechanism_type: PIN TUMBLER, part_name_assigned_by_controlling_agency: PADLOCK SET. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-719-0611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22461917
NSN: 5340-01-719-0611
FSC: 5340 — Hardware, Commercial
CAGE: 0141B — NAVANTIA SA SME. DIV NAVANTIA HQ (ESP)
SPECIFICATIONS
padlock_quantity6
shackle_diameter0.281 INCHES NOMINAL IN
special_featuresSHAKLE MADE OF BRASS
shackle_clearance2.5 INCHES MINIMUM AND 3.0 INCHES MAXIMUM IN
end_item_identificationSUBMARINE CLASS S-80 PLUS
operating_mechanism_typePIN TUMBLER
part_name_assigned_by_controlling_agencyPADLOCK SET
NSN5340-01-719-0611
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22461917 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHACKLE CLEARANCE: 2.5 INCHES MINIMUM AND 3.0 INCHES MAXIMUM IN
•
OPERATING MECHANISM TYPE: PIN TUMBLER
•
PADLOCK QUANTITY: 6
•
SHACKLE DIAMETER: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHACKLE CLEARANCE2.5 INCHES MINIMUM AND 3.0 INCHES MAXIMUM IN
OPERATING MECHANISM TYPEPIN TUMBLER
PADLOCK QUANTITY6
SPECIAL FEATURESSHAKLE MADE OF BRASS
PART NAME ASSIGNED BY CONTROLLING AGENCYPADLOCK SET
END ITEM IDENTIFICATIONSUBMARINE CLASS S-80 PLUS
SHACKLE DIAMETER0.281 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
AA59486-1IB06LSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 22461917?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22461917?
22461917 is a PADLOCK SET.
What parts can replace 22461917?
There is 1 known substitute for 22461917: AA59486-1IB06L. Substitute compatibility should be verified for your specific system.
What is the NSN for 22461917?
22461917 is cataloged in the U.S. Government catalog under NSN 5340-01-719-0611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22461917