PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2234-7
2234-7 ✓ Verified by PartsTable
Trust · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include thread_class: 2A LOCATION NOT OTHERWISE SPECIFIED A, overall_length: 3.500 INCHES NOMINAL IN, thread_direction: RIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED, nominal_thread_size: 0.500 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, thread_quantity_per_inch: 20 LOCATION NOT OTHERWISE SPECIFIED, thread_series_designator: UNF LOCATION NOT OTHERWISE SPECIFIED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0805, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2234-7
NSN: 3110-00-100-0805
FSC: 3110
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
thread_class2A LOCATION NOT OTHERWISE SPECIFIED A
overall_length3.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
nominal_thread_size0.500 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
thread_quantity_per_inch20 LOCATION NOT OTHERWISE SPECIFIED
thread_series_designatorUNF LOCATION NOT OTHERWISE SPECIFIED
NSN3110-00-100-0805
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2234-7 · Trust ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 1.1772 INCHES NOMINAL IN
•
BORE DIAMETER: 1.8125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
CONE WIDTH1.1772 INCHES NOMINAL IN
BORE DIAMETER1.8125 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
2-9161Interchangeable
interchangeable cross-reference
interchangeable
02 09161Interchangeable
interchangeable cross-reference
interchangeable
25-023Interchangeable
interchangeable cross-reference
interchangeable
1820-0157Interchangeable
interchangeable cross-reference
interchangeable
SC2183PInterchangeable
interchangeable cross-reference
interchangeable
25718Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2234-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2234-7?
2234-7 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Trust.
What parts can replace 2234-7?
There are 24 known substitutes for 2234-7: 2-9161, 02 09161, 25-023 and 21 more. Substitute compatibility should be verified for your specific system.
Is 2234-7 still available?
2234-7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2234-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026