PartsTable
Technical Data Sheet
Download PDF

2232-3 — SWITCH,SENSITIVE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2232-3: SWITCH,SENSITIVE.

The SWITCH,SENSITIVE is a the manufacturer industrial component. Key specifications include body_style: HOLE MOUNTED, construction: ONE-PIECE, actuator_style: ROLLER ARM, inclosure_type: FULLY INCLOSED, mounting_method: BRACKET(S), outside_diameter: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-779-5527, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2232-3
NSN: 5330-00-779-5527
NIINs: 007795527, 014061574, 014183860
FSC: 5330 — Packing and Gasket Materials
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1017 OR STEEL COMP 1015 OR STEEL COMP 1012 OR STEEL COMP 1010 OR STEEL COMP 1009 OR STEEL COMP 1008 OR STEEL COMP 1006 RETAINER
body_styleHOLE MOUNTED
constructionONE-PIECE
actuator_styleROLLER ARM
inclosure_typeFULLY INCLOSED
mounting_methodBRACKET(S)
outside_diameter0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
special_featuresBASIC SWITCH IN THIS ITEM IS (91929) P/N 1SX1-T; ACTUATOR IS P/ JX25
surface_treatmentCADMIUM AND CHROMATE RETAINER
retainer_thickness0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
packing_inside_diameter0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
packing_ring_cross-sectional_diameter0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
NSN5330-00-779-5527
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2232-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,CL 2 FED SPEC ALL TREATMENT RESPONSES RETAINER
•
PACKING INSIDE DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
RETAINER THICKNESS: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE RETAINER
•
MATERIAL: STEEL COMP 1017 OR STEEL COMP 1015 OR STEEL COMP 1012 OR STEEL COMP 1010 OR STEEL COMP 1009 OR STEEL COMP 1008 OR STEEL COMP 1006 RETAINER
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,CL 2 FED SPEC ALL TREATMENT RESPONSES RETAINER
PACKING INSIDE DIAMETER0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
RETAINER THICKNESS0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE RETAINER
MATERIALSTEEL COMP 1017 OR STEEL COMP 1015 OR STEEL COMP 1012 OR STEEL COMP 1010 OR STEEL COMP 1009 OR STEEL COMP 1008 OR STEEL COMP 1006 RETAINER
CONSTRUCTIONONE-PIECE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2232-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2232-3?
2232-3 is a SWITCH,SENSITIVE. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 2232-3?
2232-3 is cataloged in the U.S. Government catalog under NSN 5330-00-779-5527. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2232-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.