PartsTable
Technical Data Sheet
Download PDF

22315LB — BEARING,ROLLER,SELF-ALIGNING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

22315LB: BEARING,ROLLER,SELF-ALIGNING.

The BEARING,ROLLER,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, bore_shape: STRAIGHT, bore_diameter: 75.0 MILLIMETERS NOMINAL MM, overall_width: 55.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, style_designator: DOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-678-3543, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22315LB
NSN: 3110-00-678-3543
NIINs: 006783543, 012038454
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 36384 — FMC CORP LINK-BELT DIV (USA)
SPECIFICATIONS
materialSTEEL ROLLER
bore_shapeSTRAIGHT
bore_diameter75.0 MILLIMETERS NOMINAL MM
overall_width55.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
style_designatorDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
features_providedLUBRICATION HOLE AND LUBRICATION GROOVE
overall_outside_diameter160.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationEXTRA TIGHT
retainer_fabrication_methodPRESSED
standard_tolerance_designationRBEC NO.1
NSN3110-00-678-3543
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 22315LB · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: DOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 160.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
OVERALL WIDTH55.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER160.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
BORE DIAMETER75.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 2
3190236Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3110006783543Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 22315LB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22315LB?
22315LB is a BEARING,ROLLER,SELF-ALIGNING.
What parts can replace 22315LB?
There are 2 known substitutes for 22315LB: 3190236, 3110006783543. Substitute compatibility should be verified for your specific system.
What is the NSN for 22315LB?
22315LB is cataloged in the U.S. Government catalog under NSN 3110-00-678-3543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22315LB