PartsTable
Technical Data Sheet
Download PDF

22314C2 — BEARING,ROLLER,SELF-ALIGNING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

22314C2: BEARING,ROLLER,SELF-ALIGNING.

The BEARING,ROLLER,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, bore_diameter: 70.0 MILLIMETERS NOMINAL MM, overall_width: 51.00 MILLIMETERS NOMINAL MM, surface_finish: GROUND, style_designator: DOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-185-7189, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22314C2
NSN: 3110-00-185-7189
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
bore_diameter70.0 MILLIMETERS NOMINAL MM
overall_width51.00 MILLIMETERS NOMINAL MM
surface_finishGROUND
style_designatorDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
overall_outside_diameter150.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data00 GRADE AND 6 CLASS AND 264 TYPE
standard_tolerance_designationABEC NO.1
NSN3110-00-185-7189
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 22314C2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: DOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 150.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
NONDEFINITIVE SPEC/STD DATA: 00 GRADE AND 6 CLASS AND 264 TYPE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORDOUBLE ROW, SPHERICAL ROLLERS, SELF-CONTAINED, OUTER AND INNER RACEWAYS CONCAVE, NON-SEPARABLE
OVERALL WIDTH51.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER150.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
NONDEFINITIVE SPEC/STD DATA00 GRADE AND 6 CLASS AND 264 TYPE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER70.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
3020BReference document
Same NSN cross-reference
Reference document — Secondary reference
FFB185Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 22314C2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22314C2?
22314C2 is a BEARING,ROLLER,SELF-ALIGNING.
What parts can replace 22314C2?
There are 2 known substitutes for 22314C2: 3020B, FFB185. Substitute compatibility should be verified for your specific system.
What is the NSN for 22314C2?
22314C2 is cataloged in the U.S. Government catalog under NSN 3110-00-185-7189. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22314C2