PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 22314-8
22314-8 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN, overall_width: 0.3600 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-439-2579, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22314-8
NSN: 3110-00-439-2579
FSC: 3110
CAGE: 09721 — GENERAL BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN
overall_width0.3600 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0040 INCHES MAXIMUM RADIAL IN
overall_outside_diameter1.4077 INCHES MINIMUM AND 1.4082 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-439-2579
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 22314-8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
OVERALL OUTSIDE DIAMETER: 1.4077 INCHES MINIMUM AND 1.4082 INCHES MAXIMUM IN
•
MATERIAL: STEEL RETAINER
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER1.4077 INCHES MINIMUM AND 1.4082 INCHES MAXIMUM IN
MATERIALSTEEL RETAINER
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OUTER RING
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
MATERIALRUBBER SYNTHETIC SEAL
BEARING SEAL TYPECONTACT
BORE DIAMETER0.8740 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
89FInterchangeable
interchangeable cross-reference
interchangeable
904Interchangeable
interchangeable cross-reference
interchangeable
21-146Interchangeable
interchangeable cross-reference
interchangeable
CA1406Interchangeable
interchangeable cross-reference
interchangeable
A2308-3Interchangeable
interchangeable cross-reference
interchangeable
556-1803Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22314-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22314-8?
22314-8 is a BEARING,BALL,ANNULAR.
What parts can replace 22314-8?
There are 17 known substitutes for 22314-8: 89F, 904, 21-146 and 14 more. Substitute compatibility should be verified for your specific system.
Is 22314-8 still available?
22314-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22314-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026