PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 223085-001
223085-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 303 OVERALL, overall_length: 4.562 INCHES NOMINAL IN, handle_clearance: 1.188 INCHES NOMINAL IN, surface_treatment: OXIDE OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-038-0512, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
223085-001
NSN: 5340-01-038-0512
FSC: 5340
CAGE: 81413 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OR STEEL COMP 303 OVERALL
overall_length4.562 INCHES NOMINAL IN
handle_clearance1.188 INCHES NOMINAL IN
surface_treatmentOXIDE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582,COND A ASSN STD 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.250 INCHES NOMINAL IN
NSN5340-01-038-0512
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 223085-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582,COND A ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNF
•
MATERIAL: STEEL COMP 304 OR STEEL COMP 303 OVERALL
•
SURFACE TREATMENT: OXIDE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING FACILITY QUANTITY2
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582,COND A ASSN STD 2ND MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
MATERIALSTEEL COMP 304 OR STEEL COMP 303 OVERALL
SURFACE TREATMENTOXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL LENGTH4.562 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.250 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
18X12X10SWDOM275Interchangeable
interchangeable cross-reference
interchangeable
ASTM-D1974Interchangeable
interchangeable cross-reference
interchangeable
ASTM-D1974/D1974MInterchangeable
interchangeable cross-reference
interchangeable
681887Interchangeable
interchangeable cross-reference
interchangeable
30635Interchangeable
interchangeable cross-reference
interchangeable
K690Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 223085-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 223085-001?
223085-001 is a HANDLE,BOW.
What parts can replace 223085-001?
There are 8 known substitutes for 223085-001: 18X12X10SWDOM275, ASTM-D1974, ASTM-D1974/D1974M and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 223085-001?
223085-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-038-0512. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 223085-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026