PartsTable
Technical Data Sheet
PartsTable / MRO / 223-94
223-94 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The TERMINAL,QUICK DISCONNECT is a the manufacturer industrial component. Key specifications include material: RUBBER BODY, seat_angle: 45.0 DEGREES NOMINAL, thread_class: 2A A, largest_width: 0.173 INCHES SINGLE END IN, overall_height: 1.312 INCHES NOMINAL IN, overall_length: 0.734 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-071-1665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 223-94
NSN: 4820-00-071-1665
FSC: 4820
CAGE: 14487 — PROVISION, INC. DBA PROVISION INC (USA)
SPECIFICATIONS
materialRUBBER BODY
seat_angle45.0 DEGREES NOMINAL
thread_class2A A
largest_width0.173 INCHES SINGLE END IN
overall_height1.312 INCHES NOMINAL IN
overall_length0.734 INCHES IN
shoulder_width0.110 INCHES NOMINAL IN
inside_diameter0.315 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
shoulder_height0.312 INCHES NOMINAL IN
outside_diameter0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
performance_typeSTANDARD CAPACITY
special_featuresTR 3M ROLOC QUICK CHANGE DISK, GRIT 50; 3.000 IN DIA; FOR HARD TO REACH AREAS IN PAINT, RUST, AND WELD REMOVAL; FITS ANY 0.250 IN AIR TOOL OR DRILL; 30000 MAX RPM; PLASTIC GREEN BUTTON; 25 PER BOX IN
NSN4820-00-071-1665
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 223-94 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER WIDTH: 0.110 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
STYLE DESIGNATOR: PLUG
•
MATERIAL: COPPER ALLOY AND PLASTIC
•
SHOULDER HEIGHT: 0.312 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNEF
•
SEAT ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
SHOULDER WIDTH0.110 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.438 INCHES IN
STYLE DESIGNATORPLUG
MATERIALCOPPER ALLOY AND PLASTIC
SHOULDER HEIGHT0.312 INCHES NOMINAL IN
OVERALL HEIGHT1.312 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNEF
SEAT ANGLE45.0 DEGREES NOMINAL
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
2962447Interchangeable
interchangeable cross-reference
interchangeable
7573Interchangeable
interchangeable cross-reference
interchangeable
22394Interchangeable
interchangeable cross-reference
interchangeable
22395Interchangeable
interchangeable cross-reference
interchangeable
197583Interchangeable
interchangeable cross-reference
interchangeable
612Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 223-94?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 223-94?
223-94 is a TERMINAL,QUICK DISCONNECT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 223-94?
There are 11 known substitutes for 223-94: 2962447, 7573, 22394 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 223-94?
223-94 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-071-1665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 223-94

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026